Calibrating CNC Machine

The mounts are finally attached to the spindle for our X and Y plane of the CNC Machine. The black box we had before had a defect for the Y axis, which slowed our project down by a week. Due to the issue, we were only able to calibrate the X plane. We finally received our black box this Wednesday and can now test and calibrate the Y axis. This portion will begin after the gantry, spindle, and board is set up. We will possibly be able to test the system soon.

Picture of the base with the spindle and gantry connected to the plate located on the X axis.

3D printed hedges used to stop the plates from falling.

The software used for the CNC Machine, OpenBuild.


Comments are closed.